Midi Controllers

Reihenfolge
In absteigender Reihenfolge

Gitter Liste

10 pro Seite

Artikel 1 bis 10 von 11 gesamt

  1. 1
  2. 2
  1. Disaster Area DPC-8EZ Disaster Area DPC-8EZ

    Disaster Area DPC-8EZ

    429,00 €

    Lieferzeit: Auf Lager

    • Compact size – 10″ x 2.6″ x 2″ excluding switch caps and jacks.
    • No special power supply required – uses less than 120mA, 9V from a Pedal Power 2 or similar.
    • 5 footswitches for preset selection or manual effects loop control.
    • 48 presets accessible by foot, arranged in four folders with three banks of four presets each.
    • 128 presets accessible using an external MIDI controller
    • Full MIDI control of presets and effects loops 8 effects loops with a custom-designed switching matrix
    • Dedicated insert connection between loops 4 and 5
    • Always-on tuner out with tuner mute.
    • New Z-MODE buffer allows you to tailor the impedance to work pefectly with fuzz, vibe, wah, and other impedance-sensitive pedals
    • USB connector for future firmware upgrades (PC and Mac firmware update tools available.)
  2. Disaster Area QConnect

    Disaster Area QConnect

    259,00 €

    Lieferzeit: Auf Lager

    The first controller designed specifically to interface with quarter-inch MIDI devices.

    The qCONNECT is a compact controller with eight 1/4″ outputs, designed to control an entire pedalboard full of pedals by Chase Bliss Audio, Alexander, Empress, Meris, and Bondi.  qCONNECT also supports standard 5-pin MIDI pedals, and can control one USB MIDI device (Red Panda, Zoom, etc.) using our gHOST Adaptor Cable.

    Simply connect your MIDI devices to the qCONNECT ports, then use our comprehensive setup menu to configure the port assignments and device routing.  All of the qCONNECT ports may send MIDI on the ring (Chase Bliss) or on the tip (most other brands) without using jumpers or DIP switches.

     

  3. micro.clock Tap Tempo Controller

    micro.clock Tap Tempo Controller

    129,00 €

    Lieferzeit: Auf Lager

    The Disaster Area micro.clock is an intelligent tap tempo and clock source for your pedalboard.  Synchronize two tap-tempo compatible pedals plus control one additional device with tap tempo, MIDI, or control voltage.

    The micro.clock leverages our advanced SMARTClock technology in a tiny package – just 3.6″ x 1.5″ x 1.6″ (93 x 38 x 42mm.)

    Tap the footswitch to set the master clock tempo.  The micro.clock will then send taps to your devices to lock them in to your music.

    Selectable subdivisions let you tap in quarter-notes and set your devices to dotted-eighths, eight-notes, or triplets!

    Tap the knob to view or change the subdivisions or output settings for each output, then hold the knob to save the current settings to a preset.

    Hold the footswitch down to advance to the next preset.  You can even set the number of accessible presets so that you only use what you need.

    Each tempo preset allows you to specify a tempo in BPM or milliseconds, as well as subdivisions or toggle settings for each of the three outputs.  You can also set the micro.clock to send a MIDI Program Change to an external MIDI device.

    Have a pedal that needs an odd or unusual configuration for tempo control?  The micro.clock works with devices that accept a normally-open or normally-closed footswitch, and can even send 0-3.3V control voltage that works with pedals with expression control of delay / tempo.  Check with your pedal builder for details on their expression options!

  4. Disaster Area NNB

    Disaster Area NNB

    179,00 €

    Lieferzeit: 2-5 Wochen

    The Disaster Area NNB Expanse Bridge unit is a compact interface unit that allows control of a Neunaber Expanse Series pedal by a MIDI controller.

    The NNB is designed to connect to the ExP port on the rear of the Expanse Series (also known as V2 Stereo) pedals.  The NNB is powered by the Expanse series, just connect the two with the provided Cat-5 cable.

  5. Disaster Area Smartclock Gen 3

    Disaster Area Smartclock Gen 3

    229,00 €

    Lieferzeit: 2-5 Wochen

    The Disaster Area SMARTClock Gen3 is an intelligent tap tempo and clock source for your pedalboard.  Synchronize up to four separate tap-tempo pedals plus multiple MIDI-clock capable units.

  6. Disaster Area DMC-3XL Gen 3

    Disaster Area DMC-3XL Gen 3

    239,00 €

    Lieferzeit: 2-5 Wochen

    DMC-3XL Gen3

    The DMC-3XL Gen3 is the next generation compact MIDI controller from Disaster Area.  We’ve added lots of features, connectivity, and capability, making the DMC-3XL Gen3 a next-level upgrade for your pedalboard control needs.

  7. Disaster Area DMC-4 Gen 3 Disaster Area DMC-4 Gen 3

    Disaster Area DMC-4 Gen 3

    269,00 €

    Lieferzeit: Auf Lager

    The DMC-4 Gen3 is the next generation compact MIDI controller from Disaster Area. We’ve added lots of features, connectivity, and capability, making the DMC-4 Gen3 a next-level upgrade for your pedalboard control needs.

  8. Disaster Area DMC-6 Disaster Area DMC-6

    Disaster Area DMC-6

    299,00 €

    Lieferzeit: Auf Lager

    The DMC-6 Gen3 is our most powerful next generation compact MIDI controller.  The DMC-6D was the very first Gen2 controller from Disaster Area, and it really pushed the boundaries by adding additional presets, control modes, device support, and connectivity.  We first offered the DMC-6D way back in 2013, and now the time has come for us to give it the Gen3 treatment.

  9. Disaster Area DMC-8 Disaster Area DMC-8

    Disaster Area DMC-8

    349,00 €

    Lieferzeit: Auf Lager

    The DMC-8 Gen3 is our most powerful next generation compact MIDI controller. The DMC-8D was the biggest, baddest Gen2 controller from Disaster Area, and it really pushed the boundaries by adding additional presets, control modes, device support, and connectivity. We first offered the DMC-8D way back in 2013, and now the time has come for us to give it the Gen3 treatment.

  10. Disaster Area DPC-5 Gen 3 Disaster Area DPC-5 Gen 3

    Disaster Area DPC-5 Gen 3

    479,00 €

    Lieferzeit: 2-5 Wochen

    What does it do? The DPC-5 is a compact MIDI controller and loop switcher. It’s designed to control a mix of MIDI and non-MIDI pedals in your rig, allowing you to craft presets that you can engage instantly when you need them. A single tap on your DPC-5 can turn up to five non-MIDI pedals on or off, send tap tempo to a delay or other device, change the channel on your amplifier, and switch programs on up to four MIDI devices. That’s a lot of power in a small footprint!

Reihenfolge
In absteigender Reihenfolge

Gitter Liste

10 pro Seite

Artikel 1 bis 10 von 11 gesamt

  1. 1
  2. 2